Raudulfr Shieldcrusher shows us this very simple technique of putting together an urban wall. Follow his steps and you can build one of your own. Add graffiti, posters, etc for you own special flare!
Started with cut up foam. After I cut it into chunks, I tossed them around a bit to round off the edge
Construction of the wall was easy. I just glued the bricks together.
Next I made a ladder. The ladder is made with a dowel rod and electric wire. I measured the ladder rungs against the standard ladders from the castle set. I made a stopper on my drill for the holes that the wire will set into. This prevented me from drilling in too far.
Here you can see how the ladder went together. I stripped the insulation off the wire so I could glue it into the dowel rod.
The top of the wall is 6 high.
I also added a small wall the the top, and damaged the surface. Painted it up and it's good to go. On this side you can also see I painted the metal ladder to look like it was rusting.
